Home > Lower Receiver Parts > Pistol Buffer Tube Kits
Sort By:
Page of 2
Anderson - Carbine Length Buffer Spring
Our Price: $3.00
In Stock

Anderson Manufacturing Carbine length buffer spring for the AR-15.
Anderson Milspec End Plate
Our Price: $3.00
In Stock

Anderson Standard Milspec End Plate.
Anderson Milspec Carbine Castle Nut
Our Price: $5.00
In Stock

Anderson Manufacturing Milspec carbine castle nut for AR-15.
AR15 AMBI SINGLE POINT SLING ADAPTER
Our Price: $10.00
In Stock

  • Steel
  • Ambidextrous
  • Allows QD Use of One Point Sling  
Standard AR15 Carbine Buffer
Our Price: $12.00
In Stock

Standard AR15 Carbine Buffer.
RF Pistol Buffer Tube Kit
Our Price: $40.00
In Stock

The pistol buffer tube kit includes:


* Pistol Buffer Tube
* Buffer Spring
* Standard Buffer
* Castle Nut
* End Plate
* Foam Pad
Shockwave Blade Pistol Stabilizer - ODG
Our Price: $45.00
(Out of Stock)

The Shockwave Technologies Blade Pistol Stabilizer is a lightweight, ergonomic, and ATF approved solution to enhancing your AR pistol. The high-strength polymer brace fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25" in diameter), and locks down securely for a worry-free fit.
Shockwave Blade Pistol Stabilizer - FDE
Our Price: $55.00
In Stock

The Shockwave Technologies Blade Pistol Stabilizer is a lightweight, ergonomic, and ATF approved solution to enhancing your AR pistol. The high-strength polymer brace fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25" in diameter), and locks down securely for a worry-free fit.

Thorsden Customs AR Pistol Cheek Rest Kit CAA - FDE
Our Price: $64.00
In Stock

For many years AR and AK pistols (among others) were considered to be a novelty by firearms enthusiasts. The weight of the platform and the power of the .223 and 7.62x39 round made them impractical to use and achieve repeatable accuracy. That all changed in 2013 with the arrival of several innovative products designed to improve stability and ergonomics. With these simple improvements the platform quickly went mainstream. Among these products is the Thordsen Customs AR/AK Pistol Cheek Rest Kit.

The kit is a Hybrid design utilizing either our Standard or Enhanced Buffer Tube Cover kits and the Command Arms SST1 Stock Saddle. The two are joined together using a specially designed adapter kit and all of the original mounting hardware. The result is a rock solid, ergonomic, cheek weld that provides stability for accurate, repeatable, shooting and a proper sight line for your favorite optics or sights.

NEW FOR 2015

Our new AR/AK Pistol Cheek Rest kits have been retooled for 2015. The CAA Saddle, Buffer Tube Cover, and adapter are now pre-assembled in house with new, easy to follow, instructions on the inside flap of the new header card.

COMPATIBILITY:

  • DOES NOT FIT ANY BUFFER TUBE OVER 1.18" IN DIAMETER
  • Fits any pistol buffer tube between 1.16" and 1.18" diameter
  • Fits any standard Commercial or Mil-Spec carbine buffer tube

FEATURES:

  • Provides ergonomic cheek weld
  • 2 Quick Detach Sling hard points (Enhanced Pistol Cheek Rest Kit only)
  • 2 water tight storage compartments
  • Construction: Glass filled polymer
  • Instructions and mounting hardware included

SPECIFICATIONS:

  • Width: 2.9"
  • Height: 2.9"
  • Length 7.5"
  • Weight: 7.7 oz.

Made in USA


ATF ADVISORY

The Bureau of Alcohol Tobacco Firearms and Explosives, Technology Branch has affirmed that the Thordsen Customs Buffer Tube Cover/CAA Saddle combination is a CHEEK REST and IS NOT a "rifle stock. It DOES NOT reclassify an AR/AK type "Pistol" as a "short barreled rifle" under definitions established by the National Firearms Act of 1934 or the Gun Control Act of 1968. However, BATFE does specifically warn that any misuse of, or modification to, this configuration that may cause a firearm to be used outside of its design parameters, such as being shoulder fired, may change its classification and may make a firearm subject to NFA and GCA regulations and/or illegal to possess. Click on the links below to read the letters to and from ATF.

Thorsden Customs AR Pistol Cheek Rest Kit CAA - Black
Our Price: $65.00
In Stock

For many years AR and AK pistols (among others) were considered to be a novelty by firearms enthusiasts. The weight of the platform and the power of the .223 and 7.62x39 round made them impractical to use and achieve repeatable accuracy. That all changed in 2013 with the arrival of several innovative products designed to improve stability and ergonomics. With these simple improvements the platform quickly went mainstream. Among these products is the Thordsen Customs AR/AK Pistol Cheek Rest Kit.

The kit is a Hybrid design utilizing either our Standard or Enhanced Buffer Tube Cover kits and the Command Arms SST1 Stock Saddle. The two are joined together using a specially designed adapter kit and all of the original mounting hardware. The result is a rock solid, ergonomic, cheek weld that provides stability for accurate, repeatable, shooting and a proper sight line for your favorite optics or sights.

NEW FOR 2015

Our new AR/AK Pistol Cheek Rest kits have been retooled for 2015. The CAA Saddle, Buffer Tube Cover, and adapter are now pre-assembled in house with new, easy to follow, instructions on the inside flap of the new header card.

COMPATIBILITY:

  • DOES NOT FIT ANY BUFFER TUBE OVER 1.18" IN DIAMETER
  • Fits any pistol buffer tube between 1.16" and 1.18" diameter
  • Fits any standard Commercial or Mil-Spec carbine buffer tube

FEATURES:

  • Provides ergonomic cheek weld
  • 2 Quick Detach Sling hard points (Enhanced Pistol Cheek Rest Kit only)
  • 2 water tight storage compartments
  • Construction: Glass filled polymer
  • Instructions and mounting hardware included

SPECIFICATIONS:

  • Width: 2.9"
  • Height: 2.9"
  • Length 7.5"
  • Weight: 7.7 oz.

Made in USA


ATF ADVISORY

The Bureau of Alcohol Tobacco Firearms and Explosives, Technology Branch has affirmed that the Thordsen Customs Buffer Tube Cover/CAA Saddle combination is a CHEEK REST and IS NOT a "rifle stock. It DOES NOT reclassify an AR/AK type "Pistol" as a "short barreled rifle" under definitions established by the National Firearms Act of 1934 or the Gun Control Act of 1968. However, BATFE does specifically warn that any misuse of, or modification to, this configuration that may cause a firearm to be used outside of its design parameters, such as being shoulder fired, may change its classification and may make a firearm subject to NFA and GCA regulations and/or illegal to possess. Click on the links below to read the letters to and from ATF.